Home
Transport & IndustryProductfinder
Transport & IndustryProductfinder
  • Aviation
  • Bus shelters
  • Furniture construction
  • Glazing | roof lights
  • Industrial applications
  • Machine guards
  • Marine applications | shipbuilding
  • Partitions | cladding
  • Protective covers
  • Rail
  • Road
  • Roofing and ceiling applications
  • Shower cabins | sanitary equipment
  • Solariums
  • Sound proofing | insulation
  • Swimming pool enclosures
  • Urban street furniture
  • Easy to process
  • Extensive colour range
  • External long-term (>3 years)
  • External medium-term (< 3 years)
  • Fire resistance “difficult-to-ignite”
  • Food contact approved
  • Formability
  • Glossy surface
  • Good chemical resistance
  • Good optical clarity | high transparency
  • Good weather resistant
  • High impact strength
  • Interior
  • Light transmission
  • Lightweight
  • Recyclable
  • Stiffness / rigidity
  • UV-resistant
  • Wide service temperature
  • ABS (Acrylonitrile-Butadiene-Styrene-Copolymers)
  • Aluminium composite
  • HIPS (High-Impact-Polystyrene)
  • PET
  • Polycarbonate
  • PP (Polypropylene)
  • PUR foam
  • Styrenics
Products found

IMPEX® stands for a wide range of large-format, virtually unbreakable extruded polycarbonate sheets with very good optical and mechanical properties. The product range comprises a variety of different surfaces, variants and structures. The high quality sheets have a very good weathering resistance as well as an excellent impact strength. IMPEX® provides solutions for a large number of indoor and outdoor applications.

IMPEX® | Virtually unbreakable Polycarbonate sheet
IMPEX® UVP | 10 years weathering warranty
  • Excellent optical properties
  • Easy to fabricate
  • Exceptional performance at both low and high temperatures (from -40 °C to +135 °C)
  • Virtually unbreakable in normal use
  • IMPEX® UVP with a both-sides co-extruded UV protective layer, especially suitable for outdoor use

Product variants

IMPEX® HC

UV-protected polycarbonate sheets with a one- or both sides abrasion resistant coating and a good impact resistance, which makes them especially suitable for flat indoor and outdoor applications. Thanks to this special hard coating, the sheets are less sensitive against scratches and have a higher resistance to many chemicals and solvents. IMPEX® HC is used for applications such as machine glazing or partition walls – an enhanced abrasion- and chemical resistance is required. In terms of processing, IMPEX® HC can be used mostly in the same way as IMPEX® in its standard version. Due to the special surface coating, however, IMPEX® HC is not suitable for hot and cold bending.

Further information on IMPEX®

IMPEX®

* Registered in Germany. The international registration as well as the registration in the countries Norway, Switzerland, UK is pending.